Rock Cutting Tools Marble Cutting Chisel Stone Carving Tool Masonry
Search:  
TYPE-B PNEUMATIC CARVING TOOL

click for larger image
The Barre Short Stroke Pneumatic Type B Carving Tool is designed to run very smoothly at all power levels. Available in 4 sizes; all are able to provide excellent power for heavier work yet still run smoothly at low power for fine work. All sizes also have a shaped fingertip for comfort and ease of control.

$0.00

Specifications Bantam 1/2"B 3/4"B 1"B
Diameter of Piston 15/32" 1/2" 3/4" 1"
Outside Diameter 7/8" 1-1/4" 1-1/2" 1-5/8"
Length Overall 5" 5-3/4" 6-3/4" 7-1/2"
Weight 9 oz. 1lb-9oz. 2lb-12oz. 3lb-8oz.
Size Shank 5/16" 1/2" 1/2" 1/2"
Air Consumption 3 cu. ft. 4 cu. ft. 4 cu. ft. 6 cu. ft.

SIZE SELECTION DETERMINES PRICE


Quantity

Check Out

TYPE-D PNEUMATIC CARVING TOOL
TYPE-D PNEUMATIC CARVING TOOL - cat4
click for larger image
The Barre "Type D" tools provide the maximum power per size ratio available anywhere. By using a longer stroke than our other pneumatic tools, the TYPE D strikes a harder blow over the full power range. The simple design and rugged construction deliver reliable and economical operation on the most demanding work. The 1" and 1-1/4" sizes are suitable for larger roughing applications and offer a shaped fingertip for greater comfort and control during extended use. The 1/2" and 3/4" sizes are perfect for finer jobs where detail and precision are required.

$0.00

Specifications 1/2"D 3/4"D 1"D 1~1/4"D
Diameter of Piston 9/16" 3/4" 1" 1-1/4"
Outside Diameter 1-1/8" 1-5/16" 1-5/8" 2"
Length Overall 5-3/4" 6-3/4" 7-7/8" 8-3/4"
Weight 1lb-4oz. 1lb-14oz. 3lb-8oz. 5lb-10oz.
Size Shank 1/2" 1/2" 1/2" 5/8"
Air Consumption 3 cu. ft. 4 cu. ft. 6 cu. ft. 8 cu. ft.

SIZE SELECTION DETERMINES PRICE


Quantity

Check Out

AIR TOOL COMFORT GRIP

click for larger image
Click here to view video Comfort and control are the big advantages of installing a Comfort Grip on your pneumatic carving tool. The snug-fitting rubber loops can be shimmied onto your air tool, providing you with a contoured hardwood handle that will significantly reduce vibration while maintaining the speed and control you have come to expect from your Trow and Holden pneumatic tools.

$0.00

SIZE SELECTION DETERMINES PRICE


Quantity

Check Out

DOUBLE COMFORT GRIP
click for larger image
If you already own a Comfort Grip (see above), you can increase it's potential by adding a Double Comfort Grip. The Comfort Grip is installed first and the Double Comfort Grip is installed below it and adjusted so that the two grips protrude from each side of the air tool. The two-handed grip is perfect for heavy, aggressive cutting action such as when using bushing chisels. If you do not already have a Comfort Grip, then order the one that fits your air tool (see above) then order the same size Double Comfort Grip. (eg. A 3/4"-B Air Tool takes a PG-2 Comfort Grip and a DG-2 Double Comfort Grip).

$0.00

SIZE SELECTION DETERMINES PRICE


Quantity

Check Out

CHISEL RETAINER

click for larger image
Click here to view video We've finally hit upon a way to secure your chisel inside a pneumatic carving tool while keeping it loose and easy to control. A simple, precision rubber part that loops onto your chisel and air tool, the Chisel Retainer is both easy to install and to remove. Elegantly simple!

$0.00

SIZE SELECTION DETERMINES PRICE


Quantity

Check Out

CHISEL TILLER

click for larger image
Click here to view video Reduce vibration and enhance control of your pneumatic chisels with the new Chisel Tiller. The rubber loops are easy to install yet secure enough for roughing out. Three sizes are available to fit all of your Trow and Holden air chisels.

$0.00

SIZE SELECTION DETERMINES PRICE


Quantity

Check Out

CARBIDE CARVING CHISEL
CARBIDE CARVING CHISEL - cat4
click for larger image
5/8" Blade Is Shown. Made exclusively by Trow & Holden Company, our Carving Chisels are the same size and shape as traditional machine chisels but feature an elongated carbide tip with three times more carbide, so they will last longer and require less maintenance. Available in straight or rondel styles up to 3/4" wide.

$0.00

SIZE SELECTION DETERMINES PRICE


Quantity

Check Out

CARBIDE MACHINE CHISELS
CARBIDE MACHINE CHISELS - cat4
click for larger image
Carbide-tipped Machine Chisels are used for general carving, sculpting and lettering in both soft and hard stone. Both Finishing Blade Styles and Roughing Blade Styles (with heavier carbide tips) can be provided with optional teeth or rondel blade. Please note teeth shown below on 3/4" blade. Number of teeth will vary on narrower or wider blades; for example, a 1/2" wide blade with with B teeth will have 3 teeth & a 1" wide blade with B teeth will have 5 teeth.

$0.00

SIZE SELECTION DETERMINES PRICE



Quantity

Check Out

CARBIDE MACHINE POINT

click for larger image

$0.00

SIZE SELECTION DETERMINES PRICE


Quantity

Check Out

STEEL SWEPT CAPE CHISEL WITH TEETH
STEEL SWEPT CAPE CHISEL WITH TEETH - cat4
click for larger image


Quantity

Check Out

CARBIDE MARBLE CUTTING CHISEL
CARBIDE MARBLE CUTTING CHISEL - cat4
click for larger image
Available as flats or tooth chisels, the Marble Cutting Chisels are a lighter weight chisel designed for use on marble and softer stone; even the widest blade width is light enough for use with the smaller air tools. Use the tooth chisels for roughing out or texturing. Available in flat, rondel, tooth or nibbler (combination tooth & rondel) blades. Please note teeth shown below on 3/4" blade. Number of teeth will vary on narrower or wider blades; for example, a 1/2" wide blade with with B teeth will have 3 teeth while a 1" wide blade with B teeth will have 5 teeth.

$0.00

SIZE SELECTION DETERMINES PRICE



Quantity

Check Out

CARBIDE LIMESTONE CHISEL
CARBIDE LIMESTONE CHISEL - cat4
click for larger image
Featuring more finely tapered carbide blades with traditional flared styling, these limestone chisels can be provided with flat, rondel, tooth or nibbler (combination tooth and rondel) blades. Please note teeth shown below on 3/4" blade. Number of teeth will vary on narrower or wider blades; for example, a 1/2" wide blade with with B teeth will have 3 teeth while a 1" wide blade with B teeth will have 5 teeth.

$0.00


SIZE SELECTION DETERMINES PRICE


Quantity

Check Out

CARBIDE CARVERS DRILL
CARBIDE CARVERS DRILL - cat4
click for larger image
Rotate gently between your fingers, while your pneumatic tool provides the impact, to drill holes up 1/2" depth in your material. Smaller sizes are perfect for detail carving.

$0.00

SIZE SELECTION DETERMINES PRICE


Quantity

Check Out

CARBIDE CLEANING UP CHISEL
CARBIDE CLEANING UP CHISEL - cat4
click for larger image
A Cleaning Up Chisel is used as a scraper on granite or softer stone to close the grain prior to further finishing.

$0.00

SIZE SELECTION DETERMINES PRICE


Quantity

Check Out

BARRE BANTAM CARBIDE CHISEL

click for larger image
All chisels with 5/16" shank are designed to fit the Barre Bantam Pneumatic Tool only, but can fit any pneumatic tool with a 1/2" shank opening when used with a pneumatic tool shank adaptor.

$0.00

SIZE SELECTION DETERMINES PRICE


Quantity

Check Out

CARBIDE BANTAM BUSHING CHISELS

click for larger image
All Chisels with 5/16" shanks are designed to fit the Barre Bantam Pneumatic Tool only but can fit any pneumatic tool with a 1/2" shank opening when used with a Pneumatic Tool Shank Adapter.

$0.00

SIZE SELECTION DETERMINES PRICE


Quantity

Check Out

CARBIDE 4-POINT TOOTH CHISEL

click for larger image
Featuring Solid Carbide Tips, these 4-point bushing tools are ideal for roughing out and texturing on all kinds of stone.

$0.00

SIZE SELECTION DETERMINES PRICE


Quantity

Check Out

CARBIDE 9-POINT TOOTH CHISEL

click for larger image
Featuring Solid Carbide Tips, these 9-point bushing tools are ideal for roughing out and texturing on all kinds of stone.

$0.00

SIZE SELECTION DETERMINES PRICE


Quantity

Check Out

SWIVEL RETAINER
SWIVEL RETAINER - cat4
click for larger image
The Swivel Retainer is designed specifically for use with our Bushing Chisels, but will work with any round shank tool. It easily and securely clips on to the air tool with a flexible loop, keeping the chisel free to "dance" on the stone. Swivel Retainers require no modifications to your air tools or chisels and are available to fit all of our various size pnuematic tools.

$0.00

SIZE SELECTION DETERMINES PRICE


Quantity

Check Out

CARBIDE CUP CHISEL
CARBIDE CUP CHISEL - cat4
click for larger image
A bushing tool that will follow the contour of the stone and close the surface without digging in, the Cup Chisel leaves a unique finish.

$0.00

SIZE SELECTION DETERMINES PRICE


Quantity

Check Out

CARBIDE MARBLE FROSTING TOOL
CARBIDE MARBLE FROSTING TOOL - cat4
click for larger image
Use the Frosting Tool to leave a fine texture in marble or softer stone.

$0.00

SIZE SELECTION DETERMINES PRICE


Quantity

Check Out

CARBIDE DOUBLE BLADE CHISEL
CARBIDE DOUBLE BLADE CHISEL - cat4
click for larger image
Used vertically like the other bushing tools, the Double Blade Chisel is usually used after the 4-Point or 9-Point for further smoothing.

$0.00

SIZE SELECTION DETERMINES PRICE


Quantity

Check Out

CARBIDE THREE-BLADE BUSHING CHISEL
CARBIDE THREE-BLADE BUSHING CHISEL - cat4
click for larger image
Use a Three Blade Chisel to create an axed or brushed finish.

$0.00

SIZE SELECTION DETERMINES PRICE


Quantity

Check Out

CARBIDE CRISS-CROSS CHISEL
CARBIDE CRISS-CROSS CHISEL - cat4
click for larger image
The Criss-Cross chisel leaves a unique cross-hatched finish and nicely follows the 9-Point or Three Blade chisels.

$0.00

SIZE SELECTION DETERMINES PRICE


Quantity

Check Out

CARBIDE CAPE CHISEL
CARBIDE CAPE CHISEL - cat4
click for larger image
SIZE SELECTION DETERMINES PRICE


Quantity

Check Out

CARBIDE RIPPER
CARBIDE RIPPER - cat4
click for larger image
SIZE SELECTION DETERMINES PRICE


Quantity

Check Out

STEEL SWEPT CAPE CHISEL
STEEL SWEPT CAPE CHISEL - cat4
click for larger image
Click here to view video These tools are used almost exclusively by masons to remove old mortar in preparation for repointing. Their curved shape prevents the chisel from getting stuck in mortar joints. All Stock is 1/2" Square and all shanks are 1/2" Round. Steel Blade Only.

$0.00

SIZE SELECTION DETERMINES PRICE


Quantity

Check Out

DETACHABLE STRIKING CAP
DETACHABLE STRIKING CAP - cat4
click for larger image
The Striking Cap provides round-shank tools with a 1-3/8" round hardened steel striking surface, protecting the shank from damage when used with a hand hammer. Ideal for light-duty use; not intended for use with Carving or Bushing Chisels.

$17.00



Quantity

Check Out

PNEUMATIC TOOL SHANK ADAPTOR
PNEUMATIC TOOL SHANK ADAPTOR - cat4
click for larger image
If you own chisels with a smaller 5/16" round shank, this will enable you to use them in a Trow & Holden 1/2' shank pneumatic tool. Converts 5/16" Shank Size to a 1/2" Shank Size.

$20.00



Quantity

Check Out

WOOD CHISEL ADAPTOR
WOOD CHISEL ADAPTOR - cat4
click for larger image
Click here to view video Insert your tang type wood chisel or gouge into this handy adaptor to convert your hand tool into an air-powered wood carving tool. Use with a Trow & Holden 1" pneumatic carving tool for medium to heavy material removal, use 3/4" for finer detailed work.

$36.00



Quantity

Check Out

PNEUMATIC TOOL HOSE ASSEMBLY

click for larger image
Your Trow & Holden carving tool is typically attached to the air compressor with a hose assembly that consists of the following items. A completely assembled hose assembly is available for purchase above (does not include Staubli "Quick Connect")

$0.00

1 Staubli "Quick Connect" Male End
2 Staubli "Quick Connect" Female End
3 Inlet Bushing (needed if NOT using a quick connect)
4 Hose Nipple
5 Air Hose
6 Air Stopcock (available in brass or plastic)
7 Air Hose
8 Hose Nipples

SELECTION DETERMINES PRICE



Quantity

Check Out


Your Cart

Items in your cart: 0


About Us Masonry
Restoration
Hard Stone Soft Stone Catalog Contact Video Links Home