Carbide Roughing Chisels

A carbide roughing chisel used for material removal with or without a pneumatic hammer

A carbide roughing chisel that can be used with a pneumatic hammer

Carbide Roughing Chisels

Select Blade Width

1/2in (13mm) ROUGHING Blade- $59

CC1212R12

CC1212R12 -

1/2in (13mm) ROUGHING Blade- $59

CC5812R58 -

5/8in (16mm) ROUGHING Blade- $62

CC3412R34 -

3/4in (19mm) ROUGHING Blade- $68

CF5812R1 -

1in (25mm) ROUGHING Blade- $75

CF5812R114 -

1-1/4in (32mm) ROUGHING Blade- $78

CC5858R58 -

5/8in (16mm) ROUGHING Blade (FOR 1-1/4in PISTON AIR-HAMMER ONLY)- $62

CF5858R1 -

1in (25mm) ROUGHING Blade (FOR 1-1/4in PISTON AIR-HAMMER ONLY)- $75

CF5858R114 -

1-1/4in (32mm) ROUGHING Blade (For 1-1/4in PISTON AIR-HAMMER ONLY)- $78

A diagrram of carbide roughing chisel tooth arrangements styles and lengths

Select Tooth Option

No Teeth

A Teeth +$10

B Teeth +$10

C Teeth +$10

D - Rondel +$10

E Teeth +$15

F Teeth +$15

G Teeth +$10

H Teeth +$10

QTY

Engraving? + $8

(up to 22 characters)

$59

Documentation

Pneumatic Tool Guide

Guia Para Martillos Neumaticos

Product Description

Roughing Chisels feature heavier-duty carbide tips for more aggressive material removal. These chisels are best suited for hard stone and used in our larger Pneumatic Hammers. Please note teeth shown below on 3/4in blade. Number of teeth will vary on narrower or wider blades; for example, a 1/2in wide blade with with B teeth will have 3 teeth & a 1in wide blade with B teeth will have 5 teeth.

Product Features

Heavier-duty carbide for aggressive material removal

HOLIDAY SPECIAL: A free Limited Edition Trow & Holden T-shirt will be included with every Tool Set or tool purchase more than $375!